This used laboratory drying oven with forced convection, Termaks TS 8136 was tested in our laboratory and is in a good state (see pictures).Īre you interested in this product or require more info ? All models in this series are equipped with a ventilator fan that can be regulated at 4 different speeds. In addition, the Termaks TS 8136 is equipped with an extra thermostat that cuts the power to the heater if the temperature should rise above the maximum working temperature of the cabinet. All cabinets are equipped with a separate electronic safety thermostat, class 3.1, that takes over the temperature control in the case of a controller failure. The recording starts after the initial stabilisation. This is an useful aid in evaluating the temperature accuracy. The controller records maximum and minimum temperatures, and the average temperature is also calculated. There is an acoustic end-of-cycle warning. It can also be programmed with a delayed start option. The timer starts only when the set temperature is reached. Alarm limits can be set both below and above the set temperature. The controller is equipped with both flashing and acoustic alarm. The controller has passed the tests for the highest class of EMC requirement for the heavy industry (EN 50081-1 and EN 50082-1). Digital calibration of temperature is easily operated by entering new constants from the keyboard into the microprocessor. It has a number of functions, such as adjustable alarm limits, acoustic alarm, data logging, timer, 4 fan speeds and PID control The temperature controller is very easy to operate and has a large, green display.
The TS 8136 is recommended when operating with the same temperature throughout the whole process, and when a written report is not needed.
Offered for sale a used laboratory drying oven with forced convection, Termaks TS 8136.
0 kommentar(er)
